Water/Wastewater Analysis
Water and wastewater samples should be taken in at least 1 liter clean (never used) plastic drum / glass jar. If possible, the mouth of the container should be closed so that there is no air between the lid and the sample. Necessary precautions should be taken to avoid shaking during transportation. The samples to be analyzed for oil and grease should be taken directly from the source in a 1 liter glass jar, without using any transfer container.
Bacteriological analysis: For Total coliform and Fecal coliform analysis, the sampling point (tap, pipe end) should be sterilized with alcohol. The samples should be taken directly in the sterile container, by holding the bottom of the container, after the water is drained for 10-15 minutes, and delivered to our laboratory within 6 hours.
Sampling: Samples must be taken by our personnel as per the regulation, in the tests carried out to obtain discharge permits from authorized institutions (Ministry of Environment and Urbanization and the institutions authorized by it). If transportation is not provided by the company, the transportation fee will be included in the prices.